Make Calls; Voice Calls - Nokia N81 User Manual

Make calls

Voice calls

1
In the standby mode, enter the phone number,
including the area code. To remove a number, press
For international calls, press
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2
Press the call key to call the number.
3 Press the end key to end the call (or to cancel the call
attempt). Pressing the end key always ends a call, even
if another application is active.
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select
To make a call from Contacts, press
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press the call key.
You must copy the contacts from your SIM card to
Contacts before you can make a call from Contacts. See
'Copy contacts', p. 32.
86
To call a recently dialed number in the standby mode, press
the call key. Scroll to the number, and press the call key.
To send an image or a video clip in a multimedia message
.
to the other participant of the call, select
twice for the +
MMS
and change the recipient before sending. Press the call key
to send the file to a compatible device (network service).
To send DTMF tone strings (for example, a password),
select
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press
send the tone. You can add DTMF tones to the
number
To put an active voice call on hold while answering another
Unmute first.
incoming call, select
, and select
the active and the held call, select
connect the active and held calls and drop yourself from
the line, select
the call on hold, press the call key. To activate the call,
press the call key again.
During an active call, to route the sound from the handset
to the loudspeaker, select
(in UMTS networks only). You can edit the message
Options > Send DTMF. Enter the DTMF string or
or DTMF fields in a contact card.
Options > Hold. To switch between
Options > Transfer.
Tip! When you have only one active voice call, to put
Options
Options > Send
repeatedly. Select OK to
Phone
Options > Swap. To
> Activate