as snow, adjust the exposure to +1 or even +2 to
compensate the background brightness. For light subjects
against dark background, use -1 or -2.
mode—Select the desired flash mode. See 'Flash', p.
tone—Select a color effect from the list.
(images only)—Increase the light
sensitivity in low light to decrease the risk of getting
unsharp or too dark images. Higher sensitivity may
increase the graininess of the images.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
The available settings vary depending on the selected
The setup settings return to the default settings when you
close the camera.
If you select a new scene, the color and lighting settings
are replaced by the selected scene. See 'Scenes', p. 57. You
can change the setup settings after selecting a scene if
A scene helps you to find the right color and lighting
settings for the current environment. The settings of each
scene have been set according to a certain style or
Scenes are only available in the main camera.
In the active toolbar, select from the following options:
) (default) and
When you take pictures, the default scene is Auto.
To make your own scene suitable for a certain
environment, scroll to
Change. In the user defined scene you can adjust different
lighting and color settings. To copy the settings of another
Based on scene mode
Take pictures in a sequence
The sequence mode is available only in the main camera.
defined, and select
and the desired scene.