Advertisement
The 2 applications (packages) turned on by default are the only ones that need to be turned on. Nothing
needs to be done, you're just checking to make sure they're turned on. If you click on UP it will take you
back to the Configuration screen.
NOTE: If you are going to be using VPNs you will also need to click on the first radio button underneath Applications.
Click on SNMP and make sure that it is turned off. If you click on UP it will take you back to the
Configuration screen.
NOTE: Your configuration may be different from the guide if you need SNMP enabled. This is up to you if you want to use it.
Under Security and Access Configuration click on Network Access and Services, make sure that Telnet
and FTP are turned off. If you click on UP it will take you back to the Configuration screen.
NOTE: Your configuration may be different from the guide if you need FTP & Telnet enabled. This is up to you if you want to use it.
Advertisement
