Automatic Sensor Cooking - Sanyo Em-870F Instruction Manual

Automatic Sensor Cooking
This advanced microwave cooking provides simple touch operation for a wide variety of foods, yet always delivers the
results that are tailored to the food as well as to your personal preference.
Built right into your oven, the humidity sensor constantly measures steam produced from the food in the oven cavity
throughout the- cooking process, and selects the right cooking time and power level.
8 AUlOMATIC SENSOR COOKING PROGRAMS
z
AUTOMATIC SENSOR REHEATING for heating precooked foods.
COURSE # FOOD CATEGORY
Al REHEAT 1: Precooked Room Temperature and
Refrigerated Temperature Foods
A2 REHEAT 2: Precooked Frozen Dense Foods
6 AUTOMATIC SENSOR COOKING for cooking fresh or frozen foods.
COURSE #
FOOD CATEGORY COURSE # FOOD CATEGORY
cl POPCORN C4
RICE
C2 POTATOES C5
SOUP/STEW
C3 VEGETABLE
C6 FISH
2 DONENESS KEYS
The oven automatically sets to medium if no selection is made.
1 ROOM TEMP
REFRIGERATED
2 FROZEN
1 POPCORN
2 POTATOES
3 VEGETABLE
4 RICE
5 SOUP STEW
6 FISH
If you prefer
to have your food reheated or cooked more or less than the preset LOW
medium setting, touch one of the two DONENESS keys before touching START.
..........
..........
r
SENSOR
REHEAT
r
SENSOR
COOK
HIGH
..........
..........
When a different doneness is chosen from the preset medium (2), it is confirmed with a number (1 to 3) in the
program indication display.
The indication "Al-2" for "REHEAT l" changes as a
The indication "C4-2" for "RICE" changes as a differ-
different doneness is entered: ent doneness is entered:
~~
POINTS TO REMEMBER:
Before using Automatic Sensor Programs...
The oven should be plugged into power supply for more than five minutes.
.-
Wipe off any noticeable moisture or spillovers from the oven.
If the inside of the oven is very warm, wait until it cools down.
Automatic Sensor may not operate properly if the room temperature is higher than 35°C (95"F).
Do not touch STOP/CLEAR, once cooking starts. This will void the Automatic Sensor program and the food
will need to be finished by using regular microwave operation.
Make sure to use the correct food category or reheat course for the food that is to be reheated or cooked.
The oven door must remain closed while display shows program indication ("Cl-2", "C2-2", "Al-2" and so
on) unless "PAUS" appears in the display. If the door is opened,
"Err" (Error) will flash in the display. This
indicates the operation must be reprogrammed into the oven. NO-rE: The oven door maybe opened when
time countdown appears in the display.
Automatic Sensor cannot be used with other functions such as Time, Multi-Stage Cooking Auto Defrost.
–14–