Table of Contents
Advertisement
EJU40000
Watercraft operation modes
EJU31417
Low RPM Mode (VX Deluxe /
VX Cruiser)
The Low RPM Mode is a function that limits
the maximum engine speed to approximately
90% of the maximum engine speed in the nor-
mal mode.
The Low RPM Mode can only be activated
and deactivated by operating the remote con-
trol transmitter that is included with this water-
craft. (See page 25 for information on the
remote control transmitter.)
1 Remote control transmitter
TIP:
The Low RPM Mode can only be activated
when the engine is stopped in the unlock
mode of the Yamaha Security System.
Activating and deactivating the Low RPM
Mode
Activation of the Low RPM Mode will be con-
firmed by the number of beeps when the re-
mote control transmitter is operated, and by
the "L-MODE" indicator light of the multifunc-
tion information center. (See page 34 for infor-
mation on the multifunction information
center.)
Watercraft operation
Number of
Low RPM Mode
beeps
Deactivated
TIP:
If the remote control transmitter is operated
while the multifunction information center is in
the standby state, the center performs the ini-
tial operation, and then the setting is selected.
To activate the Low RPM Mode:
Push the "L-Mode" (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the "SECURITY" indicator light blinks
three times, then comes on, the "L-MODE" in-
dicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate-
ly after the information display turns off, the
"L-MODE" indicator light will not come on. The
"L-
MODE"
operation
indicator
light
Comes
Activated
on
Goes off
32
Hide quick links:
Advertisement
Table of Contents
