Recording; Nightshot - Sony HDR-SR11 Operating Manual

32
When you press QUICK ON, the
camcorder goes to sleep mode (power
saving mode) instead of turning off. The
QUICK ON lamp keeps flashing during
sleep mode. Press QUICK ON again to start
recording next time. Your camcorder
returns to recording standby in
approximately 1 second.
' Q *
Tips
• During sleep mode, the battery is consumed at
about half that of usual recording, enabling you
to save battery power.
• The power turns off automatically if you do not
operate your camcorder for a certain period
during sleep mode. You can set the time that
you want the camcorder to remain on before
automatically turning off in sleep mode
([QUICK ON STBY], p. 80).
You can record high quality still images
during movie recording by pressing
PHOTO.
" Notes
• You cannot use the flash during movie
recording.
· 6J
may appear when the capacity of the
recording media is not enough or when you
record still images continuously. You cannot
record still images while
dJ
is displayed.
,~.
Tips
• When the POWER switch is set to
n:n
(Movie),
the size of still images becomes
[t:::J
7.6M]
(16:9 wide) or [5.7M] (4:3).
• You can record still images during recording
standby in the same way as when the
0
(Still)
lamp is turned on. You can also record with the
flash.
NIGHTSHOT
ON' ,OFF
~
f11,M
*;d~
»
...
Infrared port
When you set the NIGHTSHOT switch to
ON, @ appears. You can record images in
dark places.
" Notes
• The NightShot and Super NightShot functions
use infrared light. Therefore, do not cover the
infrared port with your fingers or other objects.
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 84)
when it is hard to focus automatically.
• Do not use the NightShot and Super NightShot
functions in bright places. This may cause a
malfunction.
'~*
Tips
• To record an image brighter, use the Super
NightShot function (p. 87). To record an image
more faithfully to the original colors, use the
Color Slow Shutter function (p. 87).