Wps Setup - D-Link DCS-935L Quick Installation Manual

WPS SETUP

Alternatively, you may create a WPS connection if your router or access point supports WPS. To
create a WPS connection:
Step 1:
Press and hold the WPS button on the back of the camera for three seconds. The blue WPS status
LED above the button will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some routers,
you may need to log into the web interface and then click an onscreen button to activate the WPS
feature. If you are not sure where the WPS button is on your router or access point, please refer to
your router's user manual.
The DCS-935L will automatically create a wireless connection to your router. While connecting, the
green LED will flash and your camera will reboot.
mydlink PORTAL
After registering your DCS-935L camera with a mydlink account in the mydlink Home mobile app,
you will be able to remotely access your camera from the www.mydlink.com website. After signing in
to your mydlink account, you will see a screen similar to the following:
Step 1:
Open Internet Explorer and go to http://www.
mydlink.com, then sign into mydlink.
Step 2:
Select your camera from the device list, and
your camera's Live View will appear.
4
DCS-935L