Maintenance Intervals - Kärcher 1500 G Operating Instructions Manual

IV. S E R V I C E A N D M A I N T E N A N C E
Caution:
To prevent accidental starting when servicing the unit, always remove the spark plug or wire from the spark plug.
Maintenance Operation
A. Clean Static Guard
B. Check Motor Oil Level
C. Clean Engine
D. Clean Strainer
E. Service Air Cleaner
F. Change Motor Oil
Inspect Spark Arrester
G.
(Optional Accessory)
H. Clean Cooling System
I. Replace or Clean Spark Plug
K. Remove Combustion Deposits
1 Change oil after first 5 hours
2 Clean more often under dusty conditions or when airborn debris is present
1. MAINTENANCE INTERVALLS
Follow the recommended maintenance schedule and
make in-between checks. This will help you obtain maxi-
mum engine life.
A. Clean static guard
Clean the area shown as often as needed to prevent
overheating and engine damage.
Caution
To assure smooth operation, keep governor linkage,
springs and controls free of debris.
Periodically clean muffler area to remove all dirt and
combustible debris.
10
Daily Weekly
or every
8 hours
2
1
2
B. Check motor oil level
Check after each 8 hours of operation. Be sure oil level is
maintained.
Remove oil dipstick and wipe oil from dipstick with clean
cloth. Screw dipstick firmly into place until cap bottoms on
tube. Remove to check oil level.
Dipstick assembly must be firmly assembled into tube when
engine is operating.
C. Clean engine
Remove dirt and debris with a cloth or brush. Cleaning with
a forceful spray of water is not recommended as water
could contaminate the fuel system.
Monthly
25 hours 50 hours
Yearly
100 hours