Nokia CAR KIT CK-100 User And Installation Manual page 23

Nokia cell phone user manual
Table of Contents

Advertisement

through the radio; in that case, install the car kit using the ISO cable CA-
135 or CA-152.
1. Connect the respective wires of the power cable PCU-4 or CA-153P
to the car battery and ignition sense (if available). Connect the car
radio mute wire (if available) to the car radio.
2. Plug the power cable to the respective connector on the hands-free
unit.
3. Connect the loudspeaker SP-3 to the respective connector on the
hands-free unit.
4. Connect the stereo outputs of the hands-free unit to the AUX input
of the car radio. Use an appropriate cable specific to your car radio
(this cable is not supplied with the car kit).
After you have made all the connections, connect the external input
device CU-11 and the microphone MP-2 to the respective connectors on
the hands-free unit.
To charge a compatible Nokia mobile phone through the car kit, connect
one end of the charging cable CA-134 to the hands-free unit and the
other end to the 2.0-mm (0.08 inch) charging connector of the mobile
phone.
PCU-4/CA-153P
I n s t a l l a t i o n
SP-3
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ck-100

Table of Contents