The notification panel allows you to see a preview of
your notifications on the status bar, which you can
either acknowledge or clear. You can also access Quick
Settings from the notification panel and quickly adjust
Open the notification panel
• Swipe down from the top of the screen.
Close the notification panel
• Swipe up on the screen.
• Indicator icons remain on the status bar until you
either acknowledge or clear them.
Acknowledge a notification
• Tap the notification.
Clear all notifications
The notification panel also allows you access to Quick
Settings, where you can quickly adjust basic settings, such
as Wi-Fi or Bluetooth, and access the Settings menu.
To access Quick Settings:
Swipe down from the top of the screen.
When you use your SpeechAir for the first time or have
reset your data, no screen lock is set.
You can lock the touch screen when it's active to prevent
any unwanted device operations or access as well as
to save battery power. When your device is on and not
used for a set time period, the screen turns off and locks
• The status bar is also displayed in lock screen mode.
Lock and unlock the screen
To turn off and lock the screen:
• Briefly press the Power button.
To turn on and unlock the screen:
• Briefly press the Power button again.
Using your voice recorder
Set screen lock
You can change the screen lock method by using one of
the following options: None, Slide, PIN, Password.
on the Home screen or on the All
Swipe down and tap Security.
Tap Screen lock.
Select a screen lock method.
Choose this option to deactivate the screen lock.
Choose the slide lock method to unlock the screen.
Enter a personal PIN code consisting of 4-16 digits to
unlock the screen.
Enter your personal password consisting of 4-16
characters to unlock the screen.
• If you have set a PIN code or password and want to
change your screen lock method, first confirm the old
PIN or password.
• Longer PIN codes and passwords are safer than short
• It is very important that you remember your PIN or
password. If you forget this information, it might not
be possible to restore important data.