Download
Share
Print this page
PRESIDENT JOHNSON II Owner's Manual
  1. Manuals
  2. Brands
  3. PRESIDENT Manuals
  4. Portable Radio
  5. JOHNSON II
  6. Owner's manual

PRESIDENT JOHNSON II Owner's Manual

Hide thumbs Also See for JOHNSON II:

Advertisement

Quick Links

Download this manual See also: Service Manual, Owner's Manual
Owner's manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the JOHNSON II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PRESIDENT JOHNSON II

Summary of Contents for PRESIDENT JOHNSON II

  • Page 1 Owner's manual...
  • Page 2 Your PRESIDENT JOHNSON II ASC at a glance...
  • Page 3 SUMMARY INSTALLATION HOW TO USE YOUR CB TECHNICAL CHARACTERISTICS TROUBLE SHOOTING HOW TO TRANSMIT OR RECEIVE A MESSAGE GLOSSARY CERTIFICATE OF CONFORMITY FREQUENCY TABLES EUROPEAN NORMS...
  • Page 4 WARNING ! Before using, be careful never to transmit without first having connected the antenna (connection "B" situated on the back panel of the equipment) or without having set the SWR (Standing Wave Ratio) ! Failure to do so may result in destruction of the power amplifier, which is not covered by the guarantee.
  • Page 5 CB equipment. With the use of up-to- date technology, which guarantees unprecedented quality, your PRESIDENT JOHNSON II ASC is a new step in personal communication and is the surest choice for the most demanding of professional CB radio users. To...
  • Page 6 For CB radios, the longer the antenna, the better its results. Your dealer will be able to help you with your choice of antenna. Your PRESIDENT JOHNSON II ASC is protected against an inversion of polarities. b) Mobile antenna However, before switching it on, you are advised to check all the connec- Must be fixed to the vehicle where there is a maximum of metallic surface tions.
  • Page 7 Connect the SWR meter between the CB radio and the antenna as close as b) Manual squelch possible to the CB (use a maximum of 40 cm cable, type President CA 2C). Turn the squelch knob clockwise to the exact point where all back-ground b) To adjust the SWR meter: noise disappears.
  • Page 8 6) HI-CUT ~DW ~ M3 Shows transmission SCAN scan function activated HI-CUT (short push) AM mode selected Suppression of high frequency interferences. To use according to the receiving FM mode selected conditions. A short pressure activates the HI-CUT filter and «HI-CUT» appears HI-CUT HI-CUT filter activated on the display.
  • Page 9 a) press MEM during the scanning cycle of the channels. «MEM» is displayed. - press shortly on M1, M2 or M3. The transceiver scans the active memories (M1, M2, M3) and channels 19 - «MEM» is displayed continuously. The memorized channel is active. and 9.
  • Page 10 C) TECHNICAL CHARACTERISTICS D) TROUBLE SHOOTING 1) YOUR CB RADIO WILL NOT TRANSMIT OR YOUR 1) GENERAL TRANSMISSION IS OF POOR QUALITY - Channels : 40 - Modulation modes : AM/FM Check that the antenna is correctly connected and that the SWR is properly adjusted.
  • Page 11 F) GLOSSARY Basement : Channel 1 Base station : A CB set in fixed location Bear : Policeman Below you will find some of the most frequently used CB radio expressions. Bear bite : Speeding fine Remember this is meant for fun and that you are by no means obliged to Bear cage : Police station use them.
  • Page 12 Wall to wall : All over/everywhere What am I puttingto you? : Please give me an S-meter reading. We, GROUPE PRESIDENT ELECTRONICS, Route de Sète, BP 100 – 34540 Balaruc – FRANCE, Declare, on our own responsibility that the CB radio-communi-...
  • Page 13 SIEGE SOCIAL/HEAD OFFICE - FRANCE Route de Sète - BP 100 - 34540 BALARUC Site Internet : http://www.president-electronics.com UTZZ01375ZA(0) E-mail : groupe@president-electronics.com...