Download  Print this page

Setting Up Anynet; Scanning And Switching Between Anynet + Devices - Samsung PS42B450 User Manual

4 series.
Hide thumbs

Advertisement

Setting Up Anynet+

T
Press the
TOOLS button to display Tools menu.
You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).
Setup
Anynet+(HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the
Anynet+ (HDMI-CEC) function is disabled, all the Anynet + related
N
operations are deactivated.
Auto Turn Off →
Yes / No
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
N
The active source on the TV remote must be set to TV to use the Anynet
Auto Turn Off to Yes, connected external devices are also turned off when
N
If you set
the TV is turned off. If an external device is still recording, it may or may not turn off.

Scanning and Switching between Anynet + Devices

1. Press the TOOLS button. Press the ENTER E button to select
Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the ENTER E button.
Anynet+ devices connected to the TV are listed. If you cannot ind a device you want,
N
press the red button to scan for devices.
Only when you set
N
Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List
menu appears.
3. Press the ▲ or ▼ button to select to a particular device and press the ENTER E button.
It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
N
N
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
N
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV
when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the
connected device.
If you have selected external input mode by pressing the
N
switch to an Anynet+ device by using the Device List.
+ function.
SOURCE button, you cannot use the Anynet+ function. Make sure to
English - 30
Anynet+ (HDMI-CEC)
Device List
Setup
U
E
Move
Enter
Setup
Anynet+ (HDMI-CEC)
: ON
Off
Auto Turn Off
: Yes
On
U
E
Move
Enter
View TV
Device List
Record
:
DVDR
DVDR MENU
DVDR INFO
Receiver
On
Setup
U
L
Move
Adjust
Continued...
R
Return
R
Return
R
Return

Advertisement

Table of Contents

This manual is also suitable for:

Ps50b450Ps50b451Ps42b451

Comments to this Manuals

Symbols: 0
Latest comments: