Mount The Camera - D-Link DCS-933L Quick Installation Manual

Wireless n h.264 day/night network camera
Hide thumbs Also See for DCS-933L:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Mount the Camera

Please refer to the steps below to assist you with mounting the camera.
We suggest that you configure the camera
before mounting.
1. The camera needs to be removed to
expose the holes in the mounting
base. Unscrew the camera head
from the mounting base by turning
counterclockwise.
2. Use a flathead screwdriver to remove
the base cover from the mounting
base. Place the mounting base where
you want to position the camera and
use a pencil to mark the holes.
3. Depending on the material of the wall
or ceiling, use proper tools to drill two
holes or screws where you marked. If
the wall is made out of concrete, drill
the holes first, then insert the plastic
anchors to support the screws.
4. Place the mounting base over the
holes that are in the wall. Make sure
to align the mounting base holes with
the holes in the wall. Use the supplied
screws to attach the mounting base to
the surface of the wall.
DCS-933L
1
2
3
4
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents