Brother PDS-5000 Quick Start Manual page 5

Hide thumbs Also See for PDS-5000:
Table of Contents

Advertisement

Test Scan (scan to a computer)
1
Load your document
a
Connect the supplied USB cable to the USB
port on your scanner. Connect the other end of
the cable to the USB port on your computer.
b
Open the Top Cover 1, and then unfold the
Document Guides 2.
c
Pull the Output Tray out of the machine 1 and
then unfold the Document Stopper 2.
2
1
IMPORTANT
Always open the top cover and output tray fully.
Failure to do so may cause a risk of damage to the
document.
d
Fan the pages well.
2
1
e
Place your document, face down, top edge first
in the document feeder between the Document
Guides until you feel it touch the inside of the
machine gently. Adjust the Guides 1 to fit the
width of your document.
1
2
Scan using DS Capture
a
Double-click the DS Capture shortcut on your
desktop.
b
®
(Windows
)
Select your scanner model, and then click OK.
(Macintosh)
Click Scan or press Scan.
Your scanner starts scanning.
c
®
(Windows
)
Click Scan. Your scanner starts scanning.
NOTE
• To scan documents and configure various
settings, please ensure you have installed
the driver and connected the machine to
your computer by following the instructions
in this guide.
• For details about other scanning features, see
Scan using your computer in the User's Guide.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pds-6000

Table of Contents