Caller Id - Nokia 6560 User Manual

Activate a voice command
After you have associated a voice tag with a phone function, you can issue a command
by speaking the voice tag. There are two ways to activate a voice command:
1 If you have the optional headset attached, press and hold the headset button.
OR
Press and hold the Right selection key.
2 When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the tag, Found appears, and the command is issued.
Voice command tag options
After you have associated a voice tag to a command, you can choose one of the
following options:
• Listen to the tag (playback)
• Change the tag
• Delete the tag

• CALLER ID

With each call you place, you can determine whether your telephone number
appears to the person you are calling.
In most service areas, when you call others, your name is presented to their caller
ID (if they subscribe). With Send my caller identity, you can block the display of
your number when you make a call.
Note: This feature is available only when supported by the wireless network
and may not function if you are roaming. This feature works on a call-by-call
basis. You must enable this feature each time you want to block the
sending of your own number to the recipient's caller ID.
Store the feature code
Before you can use Send my caller identity, you must store the feature code for
activating this feature. Once the code is stored in your phone, it is sent automatically
to the network when you select this option from your phone menu.
1 From the menu, select Settings > Network services > Network feature setting.
2 Enter the feature code from your service provider and select OK.
3 Select Send my caller identity > Yes.
Show or hide your number
From the menu, select Settings > Network services > Send my caller identity >
Yes or No.
Nokia 6560 User Guide 44 Copyright © 2004 Nokia