Clean Cycle In Progress; Hot Oven After Clean With Door Still Locked; Clean Lock Icon Blinks As Door Unlocks - Frigidaire FPEW3077RF Use And Care Manual

SETTING OVEN CONTROLS
3. Once the door is closed the time of day will be visible
along with the selected clean time and the door lock
icon will be blinking in the display. Do not force the oven
door open when the self clean is active. This can
damage the automatic door locking system.
Figure 29: Clean cycle in progress
4. During the clean cycle the time of day remains in the
display and the time remaining in the clean cycle will
also be active.(Figure
Figure 30: Hot oven after clean with door still locked
5. When the clean cycle ends the oven will be too hot for
the door to unlock until the oven cools to a safe temper-
ature. This may take up to an hour. During this time the
display will show Hot along with the door lock icon.
6. Once the oven temperature reaches a safe level, CLn
will appear in the display and the lock icon will blink to
signal the end of the clean cycle with a chime. Do not
force the oven door open when the lock icon is showing
in the display; this can damage the automatic door
locking system.
7. Move both the oven mode and temperature mode knob
to the OFF position to clear the display.
Caution: To avoid possible burns, use care when opening
the oven door after a self clean cycle. Stand to the side to
allow any steam and heat to escape. The internal oven
temperature will still be hot enough to cause burns even
though the bake and broil elements appear to have cooled.
24
29)
Figure 31: Clean lock icon blinks as door unlocks
Note: Once the clean cycle ends the oven will not be
available for another clean for 4 hours.
To cancel a self clean before it ends:
Turn both the oven selector knob and the oven temperature
knob to the OFF position.