Set The Time, Zone, And Date; Configuration Settings Service; Antenna - Nokia 6500 Slide User Manual

G e t s t a r t e d
When you switch on your phone for the
first time, and the phone is in the
standby mode, you are asked to get the
configuration settings from your service
provider (network service). Confirm or
decline the query. See "Configuration"
p. 37, and "Configuration settings
service" p. 14.

Set the time, zone, and date

When you switch on your phone for the first time, and the
phone is in the standby mode, you are asked to set the time
and date. Fill in the fields, and select Save.
To access Date and time later, select
Date and time > Date & time
format, or Auto-update of time
change the time, time zone, and date settings.

Configuration settings service

To use some of the network services, such as mobile
internet services, MMS, Nokia Xpress audio messaging, or
remote internet server synchronisation, your phone needs
the correct configuration settings. For more information
14
Copyright © 2007 Nokia. All rights reserved.
Menu > Settings >
settings, Date and time
(network service) to
on availability, contact your network operator, service
provider, nearest authorised Nokia dealer, or visit the
support area on the Nokia website, www.nokia-asia.com/
6500slide/support.
When you have received the settings as a configuration
message, and the settings are not automatically saved and
activated, Configuration settings received
Select Show > Save. If required, enter the PIN code
supplied by the service provider.

Antenna

Your device may have
internal and external
antennas. As with any
radio transmitting
device, avoid touching
the antenna area
unnecessarily while the
antenna is transmitting
or receiving. Contact
with such an antenna
affects the
communication quality
and may cause the device to operate at a higher power
level than otherwise needed and may reduce the battery
life.
is displayed.