External Memory Interface - LG U370 Service Manual

3. TECHNICAL BRIEF

3.9 External memory interface

The MSM6245 device was designed to provide two distinct memory interfaces. EBI1 was targeted for
supporting high speed synchronous memory devices. EBI2 was targeted towards supporting slower
asynchronous devices such as LCD, NAND flash, SDRAM, etc.
• EBI1 Features
- 16 bit static and dynamic memory interface
- 32 bit dynamic memory interface
- 24 bits of address for static memory devices which can support up to 32MBytes on each chip select
- Synchronous burst memories supported (burst NOR, burst PSRAM)
- Synchronous DRAM memories supported
- Byte addressable memory supporting 8 bit, 16 bit and 32 bit accesses
- Pseudo SRAM (PSRAM) memory support
• EBI2 Features
- Support for asynchronous FLASH and SRAM(16bit & 8bit).
- Interface support for byte addressable 16bit devices (UB_N & LB_N signals).
- Support for 8 bit/16bit wide NAND flash.
- Support for parallel LCD interfaces, port mapped of memory mapped(18 or 16 bit).
• 1Gb NAND(16bit) flash memory + 512Mb SDRAM (32bit)
Device
FLASH
SDRAM
LGE Internal Use Only
Interface Spec
Part Name
TY9000A800KOGG
TY9000A800KOGG
Table#1. External memory interface
Maker Read Access Time
Toshiba 60 ns
Toshiba 7 ns
Copyright © 2007 LG Electronics. Inc. All right reserved.
- 50 -
Write Access Time
60 ns
7 ns
Only for training and service purposes