Turning Refrigerator On and Viewing Set Points
Press the Cooling (ON/OFF) touch pad.
■
NOTE:
After the refrigerator is turned on, the Over Temperature audio
■
alarm and indicator light may activate every 1¹⁄₂ hours until the
refrigerator and freezer temperatures are below 48°F (9°C) and
15°F (-9°C), respectively, or until the alarm is turned off. To
turn off the audio alarm and indicator light, see “Master Alarm
Reset.”
The Cooling ON/OFF touch pad on the control panel shuts
■
down refrigerator functions such as cooling, lighting, fans and
compressors. To turn the power off completely, use the power
ON/OFF switch located behind the top grille. See “Power On/
Off Switch.”
Viewing the Celsius Temperatures
Press the F/C touch pad. To redisplay degrees Fahrenheit,
■
press F/C again.
NOTE: If the freezer temperature is below zero, the negative sign
next to the freezer display will light up. This is normal.
Adjusting Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To Adjust Set Point Temperatures:
Press the refrigerator or freezer PLUS (+) or MINUS (-) touch
■
pad until the desired temperature is reached.
Press the Set To Recommended touch pad to reset the set
■
points to the factory recommended temperatures.
NOTE: The set point range for the freezer is -5°F to 3°F (-21°C
to -16°C). The set point range for the refrigerator is 34°F to
42°F (1°C to 6°C).
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Control
1° higher
Not set correctly for conditions
REFRIGERATOR too warm
REFRIGERATOR Control
1° lower
High use or room very warm
FREEZER too cold
FREEZER Control
1° higher
Not set correctly for conditions
FREEZER too warm/too little ice
FREEZER Control
1° lower
High use or heavy ice use
Page 6