Nokia 6165i User Manual page 137

2.
If necessary, select an option associated with that
function and press Add. Select Start, and speak the voice
tag clearly into the microphone. Do not select Quit
unless you want to cancel the recording. The phone
replays and then saves the recorded tag.
Using a Voice Command
After you have associated a voice tag with a function in your
phone, you can issue a command by speaking the voice tag.
To use a voice command:
1.
From standby mode, press
is displayed, pronounce the voice tag clearly into
the microphone.
2.
When the phone finds the voice tag, "Found:" is
displayed, and the phone plays the recognized voice tag
through the earpiece. The function you requested is
activated.
Voice Command Options
After you have associated a voice tag to a command, you can
select one of the following options:
Playback to listen to the voice command tag.
Change to change the voice command.
Delete to erase the voice command tag.
Using Voice Tags to Dial a Phone Number
You can use a voice dial tag to automatically dial a phone
number in your contacts. (A voice dial tag is a command you
record and use to place calls without using the keypad.) Your
phone can store up to 25 voice dial tags.
Assigning a Voice Tag to an Entry
Before you can use voice dialing, you must first assign a voice
tag to the number.
. When "Speak now"
Section 2H: Using Voice Services 111