Changing Your Security Code; Send Own Number - Nokia 6161i Owner's Manual

Note: When entering your security code, ***** will appear on the
display to keep others from viewing your code.
If you make a mistake entering the code, erase the last
digit entered by pressing Clear, or press and hold Clear.
Then enter the correct code or press Back to exit the
current feature.
If you enter an incorrect security code (Code error will
appear) five times in a row, your phone won't accept
any entries for the next five minutes.
Your phone's default security code is 12345. It's highly
recommended that you change this code at once, write it
down, and store it in a safe place away from your phone.

Changing your security code

1. Press Menu 4 3 2 4 (Settings - Security settings -
Access codes - Change security code)
2. Enter security code and press OK
3. Enter new security code at Enter new security
code:, press OK
4. Enter new security code again at Verify new
security code:, press OK
5. Phone will display Security code changed
Note: If you have changed your security code and don't remember
the new code, contact your service provider. Once you have
changed your security code, the default setting is no longer valid.

Send own number

In most service areas, when you call someone your
name will be presented to his/her caller ID (if they
subscribe). This feature allows you to block their caller
ID (i.e. your number will not be presented) when you call
them. This feature works on a per-call basis. Contact
your service provider for more details.
Note: Before you can deactivate this feature, you must first
store the feature code given to you by your service provider.
Otherwise, this feature may not appear in the menu.
See "Network feature setting" on page 46 for more details.
62