LG SH7B Owner's Manual page 33

Notes on Network Connection
y Many network connection problems during set up
can often be fixed by re-setting the router. After
connecting the speaker to the home network,
quickly power off and/or disconnect the power
cable of the home network router or cable modem.
Then power on and/or connect the power cable
again.
y Our company is not responsible for any
malfunction of the speaker and/or the internet
connection feature due to communication errors/
malfunctions associated with your broadband
internet connection or other connected equipment.
y The wireless network operate at 2.4 GHz radio
frequencies that are also used by other household
devices such as cordless telephone, Bluetooth
devices, microwave oven, and can be affected by
interference from them.
y Turn off all unused network equipment in your
local home network. Some devices may generate
network traffic.
y If the speaker fails to connect to your network or
its network connection operates abnormally, place
the speaker closer to your router and try again.
y Depending on your home network environment
and the performance of wireless router, it may not
work well to connect the speaker to your wireless
router.
y You cannot connect the speaker to wireless router
which has hidden SSID.
y The connection you've made may be disconnected
if you select other application or change the
setting of the connected speaker via "Music
Flow Player" app. In such a case, please check the
connection status.
y Even after connection of Music Flow Player app,
music may be output from your smart device. In
this case, select the connected speaker on the
playback screen.
y Depending on the speed of your network, playback
of online contents may not work well.
y Wireless signal interference may lead to
disconnection of network or stopping playback.
y You need to turn the speaker' s power off and on
again if you restart the router.
y You need to perform a factory set and setup the
network connection for speaker, if you install new
router.
y If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be displayed
differently.
Connecting 33
2