Nokia 6120 classic User Manual page 97

Time zone—to set the time zone of your location. If you set Network operator
time > Auto-update, the local time is shown.
Date format—to select the format to display dates
Date separator—to select the date separator
Time format—to select between 24-hour and 12-hour time format
Time separator—to select the time separator
Clock type—to select whether the analog or digital clock is shown in the
standby mode. See "Clock," p. 85.
Clock alarm tone—to select the alarm clock tone
Workdays—to specify days for alarms repeated only on workdays
Network operator time (network service) — to allow the network to update time,
date, and time zone information to your phone. If you select Auto-update, all
active connections are disconnected. Check any alarms as these may be affected.
Enhancement
To change settings of an enhancement, in the Enhancement sett. view, scroll
to an enhancement, such as Headset, select Options > Open and from the
following options:
Default profile—to select the profile you want to activate each time you
connect the enhancement to your phone
Automatic answer—to set the phone to answer an incoming call automatically
after 5 seconds when this enhancement is connected to your phone. If the
Ringing type is set to Beep once or Silent, automatic answer cannot be used,
and you must answer the phone manually.
Lights—To set the phone lights continuously on while using the enhancement,
select On.
96