Sony PVM-740 Operating Instructions Manual page 57

Submenu Setting
MARKER SELECT Selects the aspect ratio according to
the film, when the frame of the film
is displayed on the screen.
When 16:9 aspect ratio is selected
with the button which the aspect
function is assigned
When 4:3 aspect ratio is selected
with the button which the aspect
function is assigned
CENTER MARKER Selects ON to display the center
mark of the picture and OFF not to
display.
MARKER LEVEL Sets the luminance to display the
MARKER SELECT and CENTER
MARKER. Two settings (1 or 2)
are available. When the setting is
low, the marker is displayed dark.
MARKER MAT Selects whether you put mat on the
outside of the marker display.
• OFF: No mat is put.
• HALF: Gray mat is put.
WFM/ALM (waveform monitor and audio
level meter) DISPLAY SETTING
USER CONFIG – WFM/ALM DISPLAY SETTING
W F M / A L M :
W F M / A L M S E L E C T :
P O S I T I O N :
Submenu Setting
WFM/ALM Selects ON to display the WFM/ALM
display and OFF not to display.
Note
When the WFM/ALM display is
enabled, the marker display is not
available.
You can select from among
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3 and
OFF.
You can select 16:9 or OFF.
xx
xxx
x
Submenu Setting
WFM/ALM • WFM: A waveform monitor is
SELECT displayed.
• ALM: An audio level meter is
displayed.
When WFM is selected, the waveform
and audio level are displayed. When
ALM is selected, the audio level is
displayed in eight channels.
The audio levels of WFM or ALM are
displayed when SDI signal is input.
Select the displayed audio level channels
in SDI AUDIO SETTING.
The indications of the waveform (only
when WFM is selected) and audio level
signify as illustrated below, although the
percentage of the waveform, units and
values of the scale for the audio level do
not appear on the display.
When WFM is selected
Waveform
109%
100%
75%
50%
25%
0%
-4%
Channel number
(The channel number which is selected in
SDI AUDIO SETTING is displayed.)
When ALM is selected
Audio level
1 2 3 4 5 6 7 8
Channel number
(Displayed in eight channels, including the channel
which is selected in SDI AUDIO SETTING.)
Audio level
(dB)
OVER
0
-10
-20
-30
-60
1 2
(dB)
OVER
0
-10
-20
-30
-60
Adjustment Using the Menus
57