Clock; Tones - Nokia 6090 User Manual

Nokia cell phone user's guide
Hide thumbs Also See for 6090:
Table of Contents

Advertisement

8 Clock

8 Clock
8-1 Alarm clock
The phone can be set to ring as an alarm at a specified time. The
alarm clock uses the time format set for the clock: a 12-hour cy-
cle or a 24-hour cycle.
Note: If the phone is switched off, the alarm clock will not work.
In this menu, you can set the alarm time or select
the alarm time or
to turn off the alarm clock.
When the set alarm time expires
The timer alert tone corresponds to the ringing volume setting.
However, only a beep is heard, if you have selected
in the
menu.
When the phone alarm goes off, the message
and the lights flash. If you let the phone alarm run for a minute
or if you press M (
utes and then re-sumes ringing. Press any other key to stop the
alarm.
8-2 Clock settings
The phone is provided with a real-time clock. Since the phone
has no power backup, you may need to set the time again if the
car battery is flat or has been removed.
32
to change
or
is shown
), the alarm stops for a few min-
©
2001 Nokia Mobile Phones. All rights reserved.
In this menu, you can
lect the 12-hour or 24-hour

9 Tones

9-1 Incoming call alert
This menu function allows you to select how the phone notifies
you of an incoming call. Available options are
heard.
Note: If the phone is set to
tone, keypad tone or warning tone will be sounded.
9-2 Ringing tone
You can select any of the ringing tone types available in this
menu.
9-3 Ringing volume
A ringing tone is set off when there is an incoming call. This
menu function allows you to select any of the ringing volume
levels available. The ringing tone volume set also affects the
volume of the message alert tone.
/
,
.
or
if no ringing tone is to be
, no ringing tone, message alert
or se-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents