6V ALKALINE SCREWDRIVER SET
GENERAL SAFETY RULES
Abide by the local safety rules so as
to reduce risks of fire, electric shock
and personal injury when using the
power tools. Carefully read and
understand this user manual before
operating the product. Please keep
this manual properly for future
The following symbols will be used in
this user manual:
Indicating that fail to abide by
the instructions of the manual may
result in personal injury and death
and damage of the tool.
Indicating dangers related to
Indicating the risk of fire.
WORK AREA SAFETY
Keep work area clean and well lit.
Cluttered or dark areas invite
Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
liquids, gases or dust. Power
tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders
away while operating a power
tool. Distractions can cause you
to lose control.
Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
Keep cord away from heat, oil,
6(alkaline battery only)
sharp edges or moving parts.
Replace any damaged cord
immediately; Damaged or
entangled cords increase the risk
of electric shock.
For the tools powered by
combination battery or separate
battery component, only use the
exclusive charger of the relevant
batteries for charging. Fire may
be caused if the charger for
certain battery is used for another
When using the battery powered
tools, only use the specified
battery components, otherwise,
fire may occur.
Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while
operating power tools may result
in serious personal injury.
Dress Properly. Do not wear loose
clothing or jewelries. Tie up your
long hair and keep the hair,
clothes or gloves away from the
moving tools. Loose clothes,
jewellery or long hair can be
caught in moving tools.
Prevent unintentional starting.
Ensure that the switch is in the
off-position before fitting the
battery into the tools. Do not hold
the switch position when carrying
the tools. Carrying power tools
with your finger on the switch or
energising power tools that have
the switch on invites accidents.
Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal