Panasonic DMW-FL360 Operating Instructions Manual page 21

Hide thumbs Also See for DMW-FL360:
Table of Contents

Advertisement

-ress the [MODE] button, and
elect the flash mode. (P19)
• The flash working range is
shown on the display panel in
line with the settings of the
digital camera.
~~.w}[/--='~{fi',frJd
®
~:
Flash working range
I Check that the distance
to the subject is within
the flash working range.
~
If the subject is outside the
range, adjust the aperture of the
lens or change the distance to
the subject.
~
The flash working range
changes depending on the type
and settings (ISO sensitivitY1
aperture and focal length) of the
digital camera used.
! Press the shutter button
all the way down, and
take the picture.
3 Check that the [AUTO
CHECK] lamp is flashing.
AUTO CHECK
~.l<t(
"'0'"
.,..
• If the [AUTO CHECK] lamp
continues to flash for about
5 seconds, it means that the unit
has fired successfully. If it does
not flash, the unit has not fired
successfully. Check the settings
on the unit and the digital
camera and then take the
picture again.
21
VQT1810

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents