Cables - Silvercrest SDJ 100 A1 User Manual And Service Information

Ensure that

air can always circulate freely (do not place the device on shelves, on a thick carpet or a bed or
anywhere where ventilation slots are covered, and always leave at least 10 cm clearance on all
sides);

no direct heat sources (e.g. heating) can affect the device;

no direct sunlight or bright artificial light reaches the device;

contact with sprayed and dripping water and corrosive liquids is prevented and the device is
never operated near water; in particular it should never be immersed (do not place any objects
filled with liquids such as vases or drinks on or near the device);

the device is not in the immediate vicinity of magnetic fields (e.g. speakers);

no fire sources (e.g. burning candles) are placed on or near the device;

no foreign objects penetrate the device;

the device is not subjected to any extreme temperature fluctuations, as this may result in moisture
caused by condensation and therefore a short circuit;

the device is never subjected to excessive shocks and vibrations.

Cables

Always handle the cables by the plug and do not pull on the cables themselves. Never place the
device, any furniture or other heavy objects on the cable and take care that the cable is not kinked,
especially near the plug and connection sockets. Never make knots in any of the cables or tie them
together with other cables. Ensure that all cables are placed so that no one can trip over them and
they do not cause an obstruction.
SilverCrest SDJ 100 A1
English - 73