Main Circuit Terminal Specifications - Mitsubishi Electric FR-E700 Installation Manuallines

3.2 Main circuit terminal specifications

3.2.1 Terminal arrangement of the main circuit terminal, power supply and the motor wiring
FR-E740-016 to 095
Jumper
L1L2L3
Power supply
FR-E740-230, 300
Jumper
L1L2L3
Power supply
CAUTION
The power supply cables must be connected to R/L1, S/L2, T/L3. Never connect the power cable to the U, V, W of the inverter. Doing
so will damaged the inverter. (Phase sequence needs not to be matched.)
Connect the motor to U, V, W. At this time turning on the forward rotation switch (signal) rotates the motor in the clockwise direction
when viewed on the motor shaft.
Screw size (M4)
M
Screw size
3 ~
(M4)
Motor
Schrauben (M4)
Screw size M
(230: M4,
3 ~
300: M5)
Motor
FR-E740-120, 170
Jumper
L1L2L3
Power supply
WIRING
Screw size (M4)
Screw size
(M4)
M
3 ~
Motor
5