Cycle Options - Electrolux EFME617SIW Use And Care Manual

Cycle Options

Suitable options will automatically be indicated
when the cycle is selected. To add an option,
press options until the indicator for the desired
option fl ashes, then press set. The indicator will
be illuminated when the option has been select-
ed. Follow the same steps to delete an option.
To protect your fabrics, not all options are avail-
able with every cycle. If an option is not avail-
able for a cycle, the indicator will not light.
Occasionally, two options or settings in the same
cycle will confl ict with each other, like eco op-
tion and sanitize temperature (on select models).
When this happens, the option selected fi rst will
cause the confl icting option to not be selectable.
NOTE
To change the options once the cycle has
begun, press the pause button, make the new
selections and press start again.
extended tumble (on select models)
Select the extended tumble option if the dried
load might not be removed promptly at the end
of the cycle. The dried load will tumble continu-
ously without heat for 30 minutes. A chime will
sound periodically to remind you to remove the
dried load.
The wrinkle release option can be selected with
extended tumble to increase the amount of time
the load will tumble without heat up to 75 minutes.
delay start
Use delay start to select a drying time conve-
nient to your schedule or during off -peak energy
hours. The start of any cycle can be delayed for
30 minutes to 12 hours. Scroll through the op-
tions to select the delay start option, press
set and then to scroll to the delayed desired
time setting with the cycle selector. After choos-
ing the desired delay time, press start and the
delay time will begin counting down.
NOTE
While counting down during delay start, you
will notice your dryer periodically tumbling for
a few minutes without heat to redistribute the
load, maximizing load freshness.
Operating Instructions
perfect steam TM
The perfect steam
into the clothing prior to cool down to reduce
wrinkling, ironing and static cling.
NOTE
It is not recommended to use fabric softener
sheets with steam cycles or steam options as it
may cause staining on clothes.
anti-static (on select models)
The anti-static option injects steam into the
clothing just before cycle completion to reduce
static.
wrinkle release
The wrinkle release option helps prevent
wrinkles and tangling by tumbling the dry
load without heat for 5 minutes out of every 10
minutes. The 5 minutes on and 5 minutes off is
repeated for a total 45 minutes. A chime will
sound after every 5 minute tumble to remind you
to remove the dried load.
The extended tumble (if available) option can
be selected with wrinkle release to increase the
amount of time the load will tumble without heat
for up to 75 minutes.
lock
To lock the controls between cycles, scroll to
the lock option and press set. " " will be
displayed on the panel. To unlock the controls
scroll to the lock option and press set. Use
this feature to reduce the likelihood of acciden-
tal operation by children.
eco
The eco option reduces the drying temperature
a few degrees to save energy. In conjunction
with automatic moisture sensors, cycle times
will increase slightly, but overall energy usage
will decrease. The
the center display to indicate the eco option is
activated.
TM option injects steam
symbol will be shown on
13