Functional Description; Intended Use; Product Features - Bosch GOP 10,8 V-LI Professional Operating Instructions Manual

Precision saw
Hide thumbs Also See for GOP 10,8 V-LI Professional:
Table of Contents

Advertisement

Available languages

Available languages

28 | en
e
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held mo-
re secure than by hand.
e
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from li-
ght alloys can burn or explode.
e
Avoid unintentional switching on. Ensure
the On/Off switch is in the off position be-
fore inserting battery pack. Carrying the po-
wer tool with your finger on the On/Off swi-
tch or inserting the battery pack into power
tools that have the switch on invites acci-
dents.
e
Do not open the battery. Danger of short-cir-
cuiting.
Protect the battery against heat, e.g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
e
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
e
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
e
Use the battery only in conjunction with your
Bosch power tool. This measure alone pro-
tects the battery against dangerous overload.
e
Wear protective gloves when changing ap-
plication tools/accessories. Application to-
ols/accessories become hot after prolonged
usage.
e
Do not scrape wetted materials (e. g. wall-
paper) or on moist surfaces. Penetration of
water into the machine increases the risk of
an electric shock.
e
Do not treat the surface to be worked with
solvent-containing fluids. Materials being
warmed up by the scraping can cause toxic
vapours to develop.
e
Exercise extreme caution when handling
the scraper. The accessory is very sharp;
danger of injury.
F 000 622 274 | 12.2008

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.

Intended Use

The machine is intended for sawing and cutting
wooden materials, plastic, gypsum, non-ferrous
metals and fastening elements (e.g. nails, sta-
ples). It is also suitable for working soft wall tiles
as well as for dry sanding and scraping of small
surfaces. It is especially suitable for working
close to edges and for flush cutting. The power
tool must be used with Bosch accessories only.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Battery unlocking button
2 Battery
3 Button for charge-control indicator
4 Battery charge-control indicator
5 Thumbwheel for orbit frequency preselec-
tion
6 On/Off switch
7 Venting slots
8 Tool holder
9 Plunge saw blade*
10 Clamping bolt with spring washer
11 Allen key
12 Sanding plate*
13 Sanding sheet*
14 Felt ring of the dust extraction*
15 Retaining clip of the dust extraction*
16 Vacuum connection*
17 Dust extraction*
18 Vacuum hose*
19 Extraction adapter*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Operating instructions
Robert Bosch Ltda.

Advertisement

Table of Contents
loading

Table of Contents