Preparation; Connections - Panasonic kx-tg5438c Operating Instructions Manual

TG5438C_5439C(e-e).book Page 9 Saturday, November 6, 2004 11:17 AM

Connections

Base unit
Raise the antennas.
Charger unit (KX-TG5439C only)
Note:
L Base unit: Use only the included Panasonic AC adaptor PQLV1.
L Charger unit: Use only the included Panasonic AC adaptor KX-TCA1.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using a T-adaptor.
Fasten the AC adaptor cord.
To power outlet (120 V AC, 60 Hz)
AC adaptor
To single-line telephone jack (CA11A)
Telephone line cord
To power outlet (120 V AC, 60 Hz)
AC adaptor

Preparation

Hook
9