Setting The Date And Time - Brother DCP-330C Quick Setup Manual

8

Setting the date and time

Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality. It also allows the machine to name files
created when using the Scan to Card feature.
1
Press Menu.
2
Press a or b to choose Initial Setup,
and then press OK.
3
Press a or b to choose Date/Time, and then
press OK.
4
Press a repeatedly to enter the last two digits
of the year, and then press OK.
Date/Time
Year:20
06
(e.g. Enter 0 6 for 2006.)
5
Press a repeatedly to enter the two digits for
the month, and then press OK.
Date/Time
Month:
03
(e.g. Enter 0 3 for March.)
6
Press a repeatedly to enter the two digits for
the day, and then press OK.
Date/Time
Day:
01
(e.g. Enter 0 1 for the first of the month.)
Setting Up the Machine
7
Press a repeatedly to enter the two digits for
the hour in 24-hour format, and then press c to
next.
Date/Time
Time:
15:XX
(e.g. Enter 1 5 for 3:00 P.M.)
8
Press a repeatedly to enter the two digits for
the hour in 24-hour format, and then press OK.
Date/Time
Time:
15:25
(e.g. Enter 1 5, 2 5 for 3:25 P.M.)
Note
You can increase or decrease the number rapidly
by holding down a or b.
9
Press Stop/Exit.
Note
If you want to start again, press Stop/Exit to go
back to Step 1.
To confirm the current date and time, print
out the Users Settings Report. (See Printing
reports in Chapter 1 of the User's Guide.)
Now go to
Go to Supplied CD-ROM 'MFL-Pro Suite' on
the next page to install the drivers.
11