Service Osd - LG FLATRON W1943SB Service Manual

Xx * means sales region and module type (axxiap: inl 5ms, axxvap: auo 5ms)

Hide thumbs Also See for FLATRON W1943SB:

Table of Contents

d. Input product serial number (The SN is 12 numbers) in "S/N" Column, then the program auto writing start.

SERVICE OSD

1) Press MENU Key and Power Key, Monitor Will Enter Service OSD.

2) The SVC OSD menu contains additional menus that the User OSD menu as described below.

a) CLEAR ETI : To initialize using time.

b) Auto Color : W/B balance and Automatically sets the gain and offset value

c) AGING : Select Aging mode(on/off).

d) MODULE : Show Current module Type

e)LG LOGO: Switch logo.

f)DFC: Switch DCR function.

g) NVRAM INIT : EEPROM initialize.(24C04)

h) R/G/B-9300K : Allows you to set the R/G/B-9300K value manually.

i) R/G/B-6500K : Allows you to set the R/G/B-6500K value manually.

j) R/G/B-Offset : Allows you to set the R/G/B-Offset value manually.(Analog Only)

k) R/G/B-Gain : Allows you to set the R/G/B-Gain value manually.(Analog Only)

l)RS232: Enable/Disable Debug Mode(on/off)

m)SRGB:Allows you to set the sRGB value manually

LGE Internal Use Only

Only for training and service purposes

Table of Contents

Show Quick Links

Table of Contents

Flatron w1943sb-pfi axx*ap