Snooze Function - Silvercrest SPUV 90 A1 Operating Instructions Manual

Wakening with the alarm tone
When the alarm time is set correctly, as described above:
1. Repeatedly press the button AL1
alarm tone
alarm tone will now switch itself on.
2. Press the button
3. To deactivate the alarm function, repeatedly press the button AL1
u
AL2 until a symbol is no longer shown next to the indicator for the
alarm function
device returns to just a time display and the indicator for the alarm
function disappears.

Snooze Function

Activation of the button SNOOZE
for about 10 minutes. After these 10 minutes the alarm procedure is repeated.
• Press the button
day.
appears in the display
o
to switch the alarm tone off until the following day.
resp. in the display
o
to switch the alarm function off until the following
y u
resp. AL2
j
. At the programmed time the
j
. After about 5 seconds the
e
interrupts the alarm tone or the radio
- 12 -
until the symbol for the
y
resp.