How To Operate - Panasonic CS-W28BKP5 Operating Instructions Manual

How to Operate

Auto Restart Control.
If there is a power failure, operation will be
automatically restarted after 3 minutes when the
power is resumed with previous operation mode
and airflow direction.
(When the operation is not stopped by remote
control.)
If you do not intend to continue the operation
when the power is resumed, pull out the power
plug at main unit or power supply.
When you insert the power plug the operation
will be automatically restarted with previous
operation mode and airflow direction.
Note: 1. If you do not require Auto Restart
Control, please consult your dealer.
2. Auto Restart Control is not available
when Timer or Sleep Mode is set.
Recommended temperature for health
and comfort.
For Heating : 20°C
For Cooling : 26°C
For Soft Dry : 1°C
room temperature.
<Operation Details>
AUTO – Automatic Operation.
Once the Automatic Operation is selected, the in-
door temperature sensor operates automatically
to select the desired operation mode with Cooling,
Soft Dry or Heating.
The operation mode changes every hour, when
necessary.
9
– 24°C
– 28°C
– 02°C lower than
DRY – Soft Dry Operation.
Soft Dry is a very gentle Cooling Operation
consisting primarily of dehumidifying. It does not
lower the room temperature very much.
Cooling Operation
until room tem-
perature reaches
the setting temper-
ature
Setting
Temperature
When room temperature reaches the setting tempera-
ture, operation will switch to Soft Dry.
Super Low air-
flow amount