Operating this unit
Type of program
General information and advice
Weather reports/meteorological infor-
Stock market reports, commerce,
Contemporary modern music
Easy listening music
Oldies, golden oldies
Light classical music
Radio plays and serials
National or regional culture
Nature, science and technology
Religious affairs or services
Travel programs; not for traffic an-
Hobbies and recreational activities
Built-in CD Player
Playing a CD
Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
# You can eject a CD by pressing EJECT.
To perform fast forward or reverse,
press and hold c or d.
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
! The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 14.
Repeat play lets you hear the same track over
% Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on, RPT appears in the
# If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
% Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
Press 3 to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.