Table of Contents
Advertisement
DVG-2101SP User Manual
Digit Map
This page enables you to set up rules for modifying dialed numbers, or varying the dialing behavior depending
on the number called. The digit map specifies how to interpret digit sequences dialed by the user, and how to
convert those sequences into an outbound dial string.
Click the Add button to add a digit map.
Prefix
The prefix specifies a series of digit sequences. When you dial a series of digits, each sequence
in the prefix is tested as a possible match. The matching sequences form a set of candidate
digit sequences. The phone number set here is used to add, strip, or replace the OP number.
Mode
None: No action.
Add: When you choose this mode, the OP number will be added with the prefix number for
calling out through the specific phone interface.
Replace: If you select this mode, the OP number will be replaced by the prefix number for
calling out through the specific phone interface.
Delete: If you select this mode, the OP number will be deleted by the prefix number for calling
out through the specific phone interface.
Restrict: If you select this mode, the OP number will be restricted by the prefix number for
calling out through the specific phone interface.
OP Number
The front number you type here is the first part of the account number that you want to execute
a special function (according to the chosen mode) by using the prefix (number). If you selected
the mode "Add", "Replace", or "Delete", the OP number will be applied in this rule.
Min Len
Set the minimal length of the dial number for applying the prefix number settings.
Copyright © 2008 D-Link Australia Pty. Ltd.
Advertisement
Table of Contents
