Electrolux EXl09HL1W Installation Manual page 12

Split inverter heat pump
Hide thumbs Also See for EXl09HL1W:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Follow the instruction as below for
exchanging the position of drain cap and
drain hose in case from left side to right.
(a) Pull out the drain cap at the rear right of
the indoor unit.
(b) Pull out the drain hose at the rear left of
the indoor unit.
(c) Put the drain cap into the drain hole at the
rear left of the indoor unit.
(d) Insert the drain hose into the drain hole at
the rear right of the indoor unit.
3 Pipe arrangement
Arrange the pipe in the most convenient
direction and position.
Piping on the rear right side
11
Drain cap
Drain hose
Drain hose
Drain cap
Drain cap
Drain hose
Drain hose
from the left side
Piping on the rear right side
Drain hose
from the right side
Piping on the right side
Piping on the right side
Drain hose
from the right side
Piping on the rear left side
Drain hose
from the left side
Piping on the left side
Drain hose
from the left side
Drain hose
from the left side

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exl18hl1wExl12hl1w

Table of Contents