Technical Data; Declaration Of Conformity - Bosch Xeo Original Instructions Manual

OBJ_BUCH-377-006.book Page 27 Thursday, February 18, 2010 3:44 PM
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applica-
tions of the tool. However if the tool is used for different applica-
tions, with different accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly re-
duce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.

Technical Data

Cordless Universal Cutter
Article number
Rated voltage
No-load speed
Cutting capacity/charged battery
(6 mm carpet, enforced) approx.
Weight according to
EPTA-Procedure 01/2003
Battery
Capacity
Battery Charger
Article number
Charging time
Please observe the article number on the type plate of your machine. The
trade names of the individual machines may vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the following
standards or standardization documents: EN 60745 (battery pow-
ered products) and EN 60335 (battery chargers) according to the
provisions of the directives 2006/95/EC, 2004/108/EC,
2006/42/EC.
Bosch Power Tools
English | 27
3 603 B05 1..
V
-1
min
m
kg
Ah
2 607 225 243
UK: 2 607 225 247
h
1 609 929 W36 | (18.2.10)
Xeo
3.6
240
150
0.4
Li-Ion
1.3
3–5