Connecting; Assemble The Speakers; Speaker Setup For Bcs-414 - Pioneer BCS-414 Operating Instructions Manual

16

Connecting

Assemble the speakers

Speaker Setup for BCS-414

Preparing the speakers
middle non-skid pads
1. Attach the non-skid pads to the base of each
speaker stand bases, the subwoofer and the
2
center speaker.
For speaker stand bases:
Use the supplied adhesive to attach four middle
pads to the base (bottom) of each speaker
stand base.
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
middle non-skid pads
middle non-skid pads
middle non-skid pads
Large non-skid pads
Large non-skid pads
Large non-skid pads
Large non-skid pads
For center speaker:
Use the supplied adhesive to attach four small
pads to the base of center speaker.
2. Attach the speaker stand bases to the stems
using the screws provided.
Once you have aligned the stem and base,
secure with the small screws at the points
shown below. Note that the speaker should
face in the direction of the base of the isosceles
triangle.
Rear
Front
Rear
Rear
Rear
Front
Front
Front
thick cord
Plastic catch
thick cord
Plastic catch
Plastic catch
small non-skid pads
small non-skid pads
small non-skid pads
small non-skid pads
thick cord
thick cord