Intended Use; Safety Instructions; Personal Safety - Black & Decker BDPE400 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Intended use

Your Black & Decker Speedy Edge has been designed for
applying water based / emulsion paints to room perimeters
and around trims. This appliance is intended for indoor
household use only.

Safety instructions

@
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in injury.
Read all of this manual carefully before using the appli-
u
ance.
The intended use is described in this manual. The use of
u
any accessory or attachment or the performance of any
operation with this appliance other than those recom-
mended in this instruction manual may present a risk of
personal injury.
Retain this manual for future reference.
u
Using your appliance
Never put descaling, aromatic, alcoholic or detergent
u
products into the Speedy Edge, as this may damage it or
make it unsafe for use.
After use
When not in use, the appliance should be stored in a dry
u
place.
Children should not have access to stored appliances.
u
Inspection and repairs
Before use, check the appliance for damaged or defective
u
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defec-
u
tive.
Have any damaged or defective parts repaired or
u
replaced by an authorized repair agent.
Never attempt to remove or replace any parts other than
u
those specified in this manual.

Personal safety

a. Additional personal safety equipment such as
appropriate gloves and a respirator or mask must be
used when handling chemicals. Safety equipment used
for appropriate conditions will reduce personal injuries.
b. Do not paint yourself, any person or animal. In case
of skin injection, seek medical attention immediately.
c. Do not treat injection as a simple cut. Toxins from paint
may enter the body and cause serious bodily injury. In the
event that injection occurs, seek medical attention
immediately.
(Original instructions)
d. Beware of any hazards presented by the material
being used. Consult the markings on the container or
the information supplied by the manufacturer of the
material to be used, including requirements for the
use of personal protective equipment. Manufacturer's
instructions must be followed to reduce the risk of fire and
personal injury, derived from toxins, carcinogens, etc.
Safety of others
This appliance is not intended for use by persons (includ-
u
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing the use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any moving parts.
u
Injuries caused when changing any parts or accessories.
u
Injuries caused by prolonged use of the appliance. When
u
using any appliance for prolonged periods ensure you
take regular breaks.
Labels on the appliance
The following symbols are shown on the tool:
:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
&
Warning! Only use non-flamable liquids.
O
Warning! Wear safety glasses.
ENGLISH
3

Advertisement

Table of Contents
loading

Table of Contents