Notes On Ce Conformity; Emc And Safety Precautions; Operating Environment/Environmental Conditions; Operational Safety - Silvercrest SGT 10.6 A1 User Manual And Service Information

SilverCrest graphics tablet SGT 10.6 A1

Notes on CE conformity

This device conforms to the full extent with the basic requirements and other
required provisions of the EMC Directive 2004/108/EC. The Declaration of
Conformity can be found at the end of this manual.

EMC and safety precautions

In the event of any modification to the device that was not approved by the
manufacturer, compliance with these standards is no longer guaranteed. To
ensure electromagnetic compatibility (EMC), please pay attention to the in-
structions in the manual.

Operating environment/Environmental conditions

 Protect the device against moisture, vibration, dust, heat and direct sun-
light, as it could be damaged.
 The device should not be used outdoors or in tropical climates.

Operational safety

 Always read and comply with the instructions in the documentation of
your computer before connecting the graphics tablet.
 If the device is exposed to extreme temperature fluctuations, condensa-
tion can lead to the accumulation of moisture which can cause a short
circuit. In this case wait until the device has reached ambient temperature
before use.
 To disconnect a cable, always pull the connector and never the cable.
Ensure that the cables are not kinked. Always position the cables so that
they cannot be stepped on or cause an obstruction.
 Never place any burning objects such as candles or any objects contain-
ing liquids such as vases, cups or glasses on or near the device.
 Never exert excessive pressure on the nib of the digital pen, as this will
damage the nib.
 Keep the device away from high-frequency and magnetic interference
sources (e.g. TVs, mobile phones, loudspeakers) to prevent functional
faults.
 Only use a battery of the same type and the same charging capacity. Al-
ways ensure correct polarity of the battery. Remove the battery if you will
not be using the device for a prolonged period of time, as it can leak.
Contact with the skin will cause chemical burns. For this reason it is ab-
solutely essential to remove leaking batteries with acid-resistant protec-
tive gloves.
104 - English