Bosch PTK 3,6 LI Original Instructions Manual page 34

Cordless tacker
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
OBJ_BUCH-1433-005.book Page 34 Tuesday, August 19, 2014 11:25 AM
34 | English
Working Advice
 This machine is not suitable for working with 19 mm staples.
Therefore, do not use the machine to fasten ceiling panelling with
profiled wood or grooves.
 When the staple is jammed in the machine, do not hold the ma-
chine by the trigger. When removing a jammed staple, the trigger can
be inadvertently actuated.
Avoid blank shots in order to reduce the wear of the impact striker.
Carefully apply the tacker head 1 to the material being tacked. Soft work-
pieces (e. g. pinewood) can become damaged by applying too much pres-
sure.
Accessories for Tacking Paper
With specific accessories, the cordless tacker can be used for tacking pa-
per.
The accessories are only suitable for the PTK 3,6 LI.
– With the paper tacker 11 up to 60 sheets can be tacked.
– With the booklet maker 12 up to 30 sheets can be tacked in the centre
with two staples, making it into a booklet. The maximum size of the
sheets to be tacked is A4 (210 mm wide). For centre tacking of sheets
of A5 size, positioning marks are available.
Note: Tack staples are stronger than standard staples and are therefore
more difficult to remove from the paper.
 Use only original Bosch accessories. The precision parts of the pow-
er tool, such as the magazine, the striker and the shot duct, are
matched to Bosch staples. Other manufacturers use other steel quali-
ties and sizes.
Recommended Staple
Length
4 mm
6 mm
8 mm
10 mm
1 609 92A 0PU | (19.8.14)
Number of Sheets (80 g/m
Paper tacker
Booklet maker
2–10
2–20
10–40
20–60
2
paper)
2–10
2–20
10–30
20–30
Bosch Power Tools

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents