Easy Setup; Resetting - Sony BDP-S790 Operating Instructions Manual

View Network Status: Displays the
current network status.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
Network Connection Diagnostics
You can run the network diagnostic to
check if the network connection has
been made properly.
Connection Server Settings
Sets whether or not to display the
connected server.
Renderer Options
Auto Access Permission: Sets whether
or not to allow automatic access
from a newly detected DLNA
controller-compatible product.
Renderer Name: Displays the player's
name as it is listed on other DLNA
products on the network.
Renderer Access Control
Displays a list of DLNA controller-
compatible products and sets whether or
not each product is accessible via this
player.
PARTY Auto Start
On: Starts a PARTY or joins an existing
PARTY at the request of a
networked product compatible with
the PARTY STREAMING function.
Off: Turns off the function.
Media Remote Device Registration
Registers your "Media Remote" device.
36
Registered Media Remote Devices
Displays a list of your registered "Media
Remote" devices.
Remote Start
On: Permits turning on the system from
the "Media Remote" device.
Off: Turns off the function.

Easy Setup

Easy Initial Settings
Runs [Easy Initial Settings] to make the
basic settings. Follow the on-screen
instructions.
Easy Network Settings
Runs [Easy Network Settings] to make
the basic network settings. Follow the
on-screen instructions.

Resetting

Reset to Factory Default Settings
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
Initialize Personal Information
You can erase your personal information
stored in the player.