Cherry mw 2310 Operating Manual page 11

2 Switching off the mouse
The mouse switches to energy-saving mode
if it is not moved for 0.2 seconds. It detects
any movement and does not need to be
switched on again.
However, it still consumes power in the
energy-saving mode, therefore you should
switch it off manually for longer periods of
disuse or for transporting.
3 Tips
3.1 Adjusting the weight
The mouse can be run on one or two
batteries. This offers you the advantage of
being able to carry on working even if only
one battery is available, or adjusting the
weight of the mouse.
3.2 Battery status LED
After the LED flashes, the battery soon
needs to be changed.
3.3 Battery service life
When the 2200 mAh batteries supplied are
used, a service life of 733 hours (for 6 mA) is
achieved. Assuming the mouse is used
constantly for one hour a day and 230 work
days a year, you will only need to change the
batteries after approx. 3 years.
3.4 Surface under the mouse
A bright, structured surface under the
mouse saves energy, increases
effectiveness and ensures optimum motion
detection.
A reflective surface is not suitable for using
the mouse on.
3.5 Storing the receiver in the
mouse
The receiver is so small that it can stay in
the USB socket of a laptop while being
transported. To avoid any damage, you can
also pull out the receiver and deposit it in
the mouse to protect it from dirt and loss
(see overview page).
11