Husqvarna 2006 TE 250 Owner's Manual page 222

9-250-450-510-2005-OK 28-06-2005
ACCOPPIAMENTO SEGMENTI-
CAVE SUL PISTONE
Usando uno spessimetro
misurare il gioco assiale (H) delle
fasce elastiche.
La stampigliatura "TOP" va
sempre rivolta verso l'alto
nell'accoppiamento pistone-
segmenti.
SEGMENTO
SEGMENT
KOLBENRING
SEGMENTO
RASCHIAOLIO
OILSCRAPER
RACLEURS D'HUILE
ÖLABSTREIFRING
RASCADOR DE ACEITE
202
15:47 Pagina 206
PISTON RING/PISTON RINGS
GROOVE CLEARANCE
Use a feeler gauge to check the
axial play (H) of the rings in the
groove.
The "TOP" marking should always
be uppermost.
GIOCO AL MONTAGGIO
NOMINAL CLEARANCE
JEU AU MONTAGE
MONTAGESPIEL
JUEGO EN EL MONTAJE
TE-TC 250 (A): 0,011÷0,033 mm/0.00043÷0.00130 in.
SMR 400 (A): 0,050÷0,085 mm/0.000197÷0.00334 in.
RING TC 450-510 (A): 0,070÷0,110 mm/0.00027÷0.0043 in.
TE-SMR 450, 510 (A): 0,030÷0,065 mm/0.00012÷0.0025 in.
SMR 400 (B): 0,020÷0,055 mm/0.0008÷0.0022 in.
TE-SMR 450, 510 (B): 0,020÷0,055 mm/0.00012÷0.0025 in.
TE-TC 250 (C): 0,040÷0,110 mm/0.00016÷0.0043 in.
SMR 400 (C): 0,010÷0,180 mm/0.0004÷0.0071 in.
TC 450-510 (C): 0,040÷0,120 mm/0.00016÷0.0047 in.
TE-SMR 450, 510 (C): 0,010÷0,180 mm/0.0004÷0.0071 in.
SEGMENTS-RAINURE SUR LE
PISTON
En utilisant un épaisseurmètre,
mesurer le jeu axial (H) des
segments.
L'inscription "TOP" doit toujours
être orientée vers le haut pour
l'accouplement piston-segments.
LIMITE DI USURA
LIMITE D'USURE
VERSCHLEISSGRENZE
LIMITE DE DESGASTE
TE-TC 250 (A): 0,07 mm/0.0027 in.
SMR 400 (A): 0,17 mm/0.000197÷0.0067 in.
TC 450-510 (A): 0,22 mm/0.0087 in.
TE-SMR 450, 510 (A): 0,13 mm/0.0051 in.
SMR 400 (B): 0,11 mm/0.0043 in.
TE-SMR 450, 510 (B): 0,11 mm/0.0043 in.
TE-TC 250 (C): 0,22 mm/0.0087 in.
SMR 400 (C): 0,35 mm/0.0138 in.
TC 450-510 (C): 0,24 mm/0.0094 in.
TE-SMR 450, 510 (C): 0,35 mm/0.0138 in.
PAARUNG KOLBENRINGE-
KOLBENRINGZITZE
Mit Hilfe eines Dickenmessers
bestimme man das Axialspiel (H)
der Kolbenringe.
Bei der Paarung Kolben-
Kolbenrige muss die Beschriftung
"TOP" immer oben ausgerichtet
sein.
WEAR LIMIT