Page 2
Owner's Manual The Audionet-Team would like to congratulate you for purchasing the Audionet EPS! Surely you are a satisfied owner of an Audionet PRE 1, PRE 1 G2, PAM, CAT, MAP, MAP 1 or VIP G2. With the external power supply EPS you have the possibility to give all connected units a more sophisticated fundament.
Page 3
Note: In contrast to the other mother units, when connecting a MAP, MAP 1 or VIP G2 to the EPS both units must have inserted a power cord. For further details please refer to the user’s manual of your MAP,...
Page 4
Operating Please switch on the EPS at the rear. The position of the mains switch of the mother unit is irrelevant. Use your PRE1, PRE 1 G2, PAM or CAT as usual. All features are fully functional. The EPS is controlled by the mother unit.
Page 5
§ Output voltage not short term stable: The inner resistance is 10 times as bad as the one of your EPS causing a 10 times higher output volt- age ripple at the same load fluctuations. § Output voltage not long term stable: The output voltage of an accu-...
Page 6
· Do not open the case! No user serviceable parts inside. · Unauthorised opening voids warranty! · Do not short-circuit the output terminals! · Do only use connection cords approved by Audionet! · Use dry and smooth cloth for cleaning!
Technical Data Type low noise, highly stable and constant power supply for Audionet PRE1, PRE 1 G2, PAM, CAT,MAP, MAP 1 or VIP Power supply two oversized, encapsulated 100VA toroidal transformers and 260.000mF capacity Circuitry reference voltage sources for pos. and neg. analog voltages...
Need help?
Do you have a question about the EPS and is the answer not in the manual?
Questions and answers