Filter In The Water Inlet Hose Blocked - Bosch WVG30461GB Instruction Manual And Installation Instructions

Cleaning and maintenance
en
Filter in the water inlet hose
blocked
:
Warning
Danger of death!
Do not immerse the Aqua-Stop safety
device in water (it contains an electric
valve).
First, reduce the water pressure in the
supply hose:
Turn off the tap.
1.
Select any programme (except Spin
2.
/Drain 0/[).
Select Start/Reload. Allow the
3.
A
programme to run for approx. 40 s.
Turn the programme selector to Off.
4.
Pull out the mains plug.
Clean the filter on the tap:
5.
Disconnect the hose from the water
tap.
Clean the filter with a small brush.
Clean the filter on the back of the
6.
appliance:
Remove the hose from the rear of
the appliance.
Take out the filter with pliers and
clean it.
Connect the hose and check for
7.
leaks.
30