Technical Specification; Warranty - Alto A500.2 DRAGONFLY User Manual

Output Connector
9
These NEUTRIK connectors are used to connect with your speakers.
AC Input
10
Use it to connect your A500.2 DRAGONFLY to the supplied AC cord only. Please
check the voltage in your country before attempting toconnect the unit with the
main AC.
Fuse Holder
11
The fuse can protect the AC supplies circuit of the equipment.
CAUTION: if there is something wrong with the fuse or the fuse needs to
change, use only the recommended fuse type as indica ted in
this unit. If the fuse continues to blow after replacing, discon
tinue using this unit before being repaired.

4. TECHNICAL SPECIFICATION

MODEL
20Hz 20KHz@0.1%THD, Stereo Mode
8 ohms per channel(EIAJ)
4 ohms per channel(EIAJ)
4 ohms per channel(RMS)
Input Sensitivity @4 ohms +3dBu
Controls
Indicators (per channel)
Connectors of each channel Input: COMBO connector
Power Supply
Dimension
Net Weight

5. WARRANTY

1. WARRANTY REGISTRATION CARD
To obtain Warranty Service, the buyer should first fill out and return the enclosed Wa-
rranty Registration Card within 10 days of the Purchase Date.
A500.2 DRAGONFLY
260W
480W
245W (at THD 1%)
FRONT: Power switch, CH1 & CH2 LEVEL knobs
REAR: CH1 & CH2 LIMITER
Power-On: Green LED
Clip: Red LED
Limit: Yellow LED
Signal: Green LED
Output: NEUTRIK Speak-on connector
190-240 Vac~50Hz / 95-120Vac~60Hz
314W x 208.5D x 66.6H mm / 12.4" x 8.2" x 2.6"
3.85 kg (8.49lb)
7
-
-